How to paint a bathroom ? Painting a living room or bedroom is a familiar project for most hobbyists. With a minimum of effort, you can get a fantastic reward. But painting the bathroom is a little different than painting other areas of the house. The bathrooms are small and filled with water from various sources, and receive a lot of heavy use in addition to steam. For good results, it’s important to pay close attention to all aspects of bathroom painting, from surface preparation and color options to the painting process and finishing touches.
Quick and easy guide to learn how to paint a bathroom
Bathrooms are humid places and water will eventually get into your painting, no matter how hard you try to avoid this. Some paint manufacturers sell what they call bathroom paint – a paint that has mold-inhibiting agents and a better surface to resist moisture.
Even if you don’t want to buy special paint for the bathroom, you can still spend a little more for a quality brand of paint. Some of the cheaper paints have the same pigment as the more expensive paints, but have less solids. Solids are the components that dry to form the protective layer of acrylic latex on your wall. Better (and often more expensive) paints are often worth buying because they have more solids and therefore greater durability.
The next time you look at the shower tile, notice that the tile surface is glossy or satin. Higher gloss tiles tend to repel moisture and debris better than flatter gloss.
There are several options for painting inside the bathroom ( part 2 ) :
- Painting tiles in the bathroom
- Paint wall in the bathroom if they have humidity
- Paint the bathtub
- How to choose the best color for your bathroom?
- What to do when leaks in the bathroom?
- ideas for painting the bathroom with color
1-Guide to painting a bathroom
Clean all surfaces to be painted
Soap scum and other substances embedded in surfaces can seriously interfere with your paint job. In other areas of the home, you can sometimes skip cleaning the walls. In particular, dining rooms and bedrooms that generally only need a light dusting.
But in the bathroom, cleaning the walls is crucial. Soap suds around the edges of the bathtub (if any) and the shower can cause your nice paint to peel off. And that’s if you can even get the paint to stick in the first place. Trisodium Phosphate, or TSP, could be considered a miracle cleaning product because it’s so inexpensive, it cleans dirt, and it won’t compromise your paint job.
Be careful when painting around the toilet or bathtub
It is extremely difficult to paint around toilet tanks and do a good job. Specifically, the problem is that narrow crack between the tank and the wall. The gap is so small that you need to meticulously apply masking film and painter’s tape around the tank, then brush that area several times to get a solid color. Instead of working around the obstruction, the best move is to remove the obstruction.
Removing the toilet tank may sound complicated and difficult, but it is not. Toilets generally come in two sections: the top tank and the bowl or base. The complicated section is the base, and that section will not be removed. Turn off the water supply at the shutoff valve on the wall, flush the toilet to flush out all the water, then remove the tank with a couple old towels on the floor to catch spills. And let’s paint!
Remove all other obstructions
Remove wall plates, mirrors, bathroom exhaust vents, towel racks, and anything else that you can remove with relative ease.
Cover the areas that will not be painted:
Tape ceiling edges, trim, bathtub surround, backsplash, and other areas that will not be painted. Place cloths on the bathroom vanity, sink, mirror, and on the floor.
Be careful with the paint:
Using a 2-inch brush, paint against the painter’s tape in all areas. Keep the brush somewhat dry when painting against the tape to avoid dripping.
Painting with a roller
Place the roller cover on the roller frame. Open the paint can and pour paint into the lower reservoir of the paint tray. Generously dip the roller cover into the paint, then spread it thoroughly on the top area of the paint tray.
Paint a square area approximately 1 meter by 1 meter, using angled strokes that roughly make a “W” on the wall, then fill in the blank areas of the W with a series of roughly parallel strokes of the roller. Move to an adjacent area, making sure to work from the wet edge of the previous section.
Painting a second coat:
Wait at least two hours for the paint to dry. In cool or humid conditions, the paint will take longer to dry.
Repeat the painting process above. Start by cutting the paint, then start rolling with the roller or brush all over the walls depending on the instrument that suits you best or the one you are most comfortable with on the walls.
Clean and finish:
Once all the walls have two coats of paint then the masking tape will be removed after the paint has dried. Remove loose cloths, properly discarding any plastic sheeting. Reattach faceplates, toilet tank, towel racks, and any other accessories previously removed for the painting process to clean floors and all exposed areas
2-Painting tiles in the bathroom
What is a tile.
We will start by giving a brushstroke about what a tile is and why it has different characteristics when painting them.
Tiles are flat pieces typically made from clay, silica, and other fluxes. Generally its application is to decorate and protect bathrooms and kitchens.
They are used both on the floor and to cover walls. Its best property is impermeability (they do not have pores), hence, it is used in kitchens and bathrooms where humidity is high. This property comes in handy to protect our kitchens and bathrooms but to paint them, it does not come so well, since as it does not have pores, the adhesion of the paint is more expensive.
Basic characteristics of the tiles.
- Easy to clean.
- The tiles are easy to clean and do not preserve dirt, giving a clean and neutral appearance.
- Very hygienic.
- By not allowing dirt to pass through the tiles, it allows hygiene inside the bedrooms applied by tiles to be very hygienic, preventing germs, bacteria and fungi.
- Thermal insulator.
- It does not let electricity pass thanks to its clay components, which contributes to a better well-being inside the home.
- Its natural appearance makes the tiles after all stones (mud and clay).
- Nice decoration.
- Various very different finishes that can give a very bright, clean and modern touch to the home.
How to paint tiles.
Within this article I could tell you that there is a multi-adherent paint that is used to apply on the tile.
In fact, surely you will have seen the label ” tile paint ” on a large surface, but the truth is that the tile, due to its characteristics, has a painting process. With this article I do not want to stop recommending these types of paintings. In the beginning, they are viable, they grip well and they look good, but the duration time is poor.
I leave you a video with a clear and precise explanation on how to paint tiles :
I have created a mini- guide on how to paint tiles step by step. I hope you like it
Depending on whether the application of the paint is done for the first time or the tile is already painted, we will vary the procedure. let’s see:
New surfaces to paint.
First, we must remove any remaining dirt, grease or poorly adhered paint that the tile has. This will make any paint we put on it not grip effectively. Therefore, cleaning the tile well or sanding and cleaning it, will be the ideal method.
If you have paint that is poorly adhered and it is difficult for you to get rid of it, I recommend using solvent or stripper (remover).
Once this is done, we will have to have in our possession two types of paint:
1.- Multipurpose primer.
First, we will give a coat of multi-adherent primer (read well in the specifications of the product that works for tiles). The performance of these products on tiles is very good, with very little product we can make a large number of meters. There are many products on the market, but if you leave me a recommendation, TITAN’s multipurpose primer works very well. It is a product that is not cheap but we will not need large quantities since the performance is high.
Once dry, we will give two coats of enamel. With a total thickness of about 200 µm, (100 µm per coat), leaving the time necessary for drying between coat and coat. Avoid splashing and the use of abrasive elements after at least 3/5 days after application. The type of enamel to use is given according to the preferences of the client or applicator.
I can help you distinguish the characteristics of the enamel and you choose.
First characteristic, Enamel to water or Enamel to solvent. The difference is in the type of dilution. As is normal, and according to the European Union is imposing on us, water-based paints are being more recommended. Although it is true, that experts continue to rely more on solvent paints, for their performance, finish, thickness and more. Another advantage of water-based nail polish is that it smells less.
If you take my advice into account, and you have used TITAN multipurpose primer, I would recommend a solvent-based enamel finish.
Second characteristic, satin, gloss or matte enamel. To the taste of the consumer. The most logical thing in the tiles is that it is satin (semi-gloss)
It will not shine as bright as the glossy and it will not be totally matte like the wall.
Already painted surfaces.
In the event that the tile is in a good state of painting, the steps for painting will become cheaper and will be simplified.
First, we must eliminate the grease, humidity or any contaminant that is on the tile.
We will open the pore of the applied paint with a very fine sandpaper and we will clean the dust with a damp cloth.
If we have doubts about the state of the support, it is best to remove it with a stripper or thermal system. It is the case of the photo.
Once this is done, we will apply two coats of enamel in the desired color. Remember that in any expert center they can prepare the color to your liking, in an unimaginable color palette. Decorate your home to your liking, don’t choose the default colors if you don’t want to. The prices for the manufacture of the paint are not high, from € 2 to € 3 more per kilo.
Data to take into account before painting tiles.
- The application temperature should never drop below 10º or exceed 40º.
- The maximum relative humidity should be 75%.
- The theoretical yield varies according to the type of paint, but is around 6 m² per liter. In the case of being tiles, it will increase to 8-10.
- The type of thickness can vary although it will influence the drying times.
- It is recommended to do adhesion tests before starting the tile painting process.
- It is advisable to always read the technical data sheet of the paints that we are going to use.
Top 10 tips for painting tiles.
If you have read the article surely you already have a general idea of what you should do, even so, here I present the 10 main ideas.
- The tile does not have pores, we must be sure which paint to apply, we can have adhesion problems.
- There are tile paints, but it is advisable to prime it first.
- Before already painted surfaces, sand and clean the surface.
- Always remove the remains of poorly adhered paint.
- The finish of the glaze for painting tiles can be gloss, satin (semi-gloss) or matte. Choose the one you like.
- There is an almost infinite range of tile colors, allow yourself the luxury of choosing the one you like the most.
- The thickness of the application is important, do not leave too much layer. It will take time to dry and will not look good.
- Do not paint in high humidity or extreme temperatures.
- It is advisable to do adhesion tests before painting all the tiles.
- Read the technical data sheets of the products before their application.
Opinions on Painting Tiles (Bathroom, kitchens and others)
Regarding painting tiles (bathroom and other places) opinions are dispersed from what I have been able to see. I sincerely believe that the kitchen decoration and the application method greatly infuses the opinions created in this type of application. My best advice is to inform yourself well and not go easy, because if you do, try to do it once and hold on.
3- Paint wall in the bathroom if they have humidity
One of the most common mistakes is trying to paint on ceilings and walls that suffer from moisture problems. Because if this problem of leaks or condensation is not corrected, despite the effort and money invested in materials, the paint will bulge, peel and the wall will get wet again after a while causing more damage than good to the property.
But this has a simple solution and in this article we offer you a way to treat and paint the walls that have been affected by humidity problems.
Treating the problem of humidity in the walls.
It is recommended that any leakage problems that may be occurring and affecting the walls be repaired before taking action regarding the repair and painting of the walls.
This type of problem can be due to leaks through pipes or condensation of water vapor (this can be a bit more complicated to deal with but it can also be solved)Fix dampness:
- Humidity due to condensation
- Filtration moisture
- Capillarity moisture
Once the humidity problem has been identified and solved, then a wall repair will be carried out in order to apply a coat of paint and make it look like new by following the steps below depending on the type of wall or ceiling you have. .
How to fix humidity problems if the walls are made of plaster?
There are walls covered with plaster that are the stylization of wooden beam skeletons through which pipes, electrical cables, etc. pass. If the plaster was the victim of a leakage problem or moisture condensation in the spaces and is still intact or the humidity caused minor problems, it may be possible that it can be preserved, you just have to make sure that it dries thoroughly first (this can take several months in some cases) and then evaluate it.
Now, to paint or laminate the plaster again, the following must be taken into account:
- Solve the root problem of filtration or condensation that humidity can cause. It is the first step that must be taken.
- If there are mold stains on the wall surface or if there are salt deposits (either as a white stain or larger crystals), they should be treated before redecorating as these types of problems may reappear at some point in the future not too far away.
- When it comes to salts, a salt neutralizer is used. For this you must put the solution on the bare wall and let it dry. Once dry, proceed to continue and laminate again.
- If it is discovered that there are also black spots of mold present on the plaster walls and it is in good condition, a replacement is not necessary. It is recommended to use an anti-mold and a cleaner to ensure that all traces of mold are removed.
- It is recommended to use a cloth with hydrogen peroxide and wipe it gently but vigorously before using the anti-mold.
- Once the surfaces are clean and dry and that they are free of stains, let them dry well and paint with the paint of preference.
How to fix humidity problems If the walls are Cement?
The first step to start painting walls where there were moisture problems in the cement is simpler, you do not have to replace anything but let the wall dry well once the problem causing moisture has been solved.
However, there can be two scenarios in cement walls when humidity has occurred, the first is:
Cement walls without mold stains: If the problem of the wall was merely humidity or filtration and it was detected in time, not allowing the formation of the annoying mold, everything will be very simple.
- Using a spatula, scrape away the paint damaged and bulging due to the action of moisture.
- Then let the wall dry very well
- Use caulk to correct frieze errors that moisture may have caused to keep wall finishes looking neat.
- Sand the putty very well making the entire wall surface the same and without imperfections.
- Once dry, proceed for approximately 24 to 48 hours to paint the wall with the desired paint.
Cement walls with mold stains : If the problem of the concrete wall was detected after a while or was detected and left for a reasonable time, surely mold formed, this is an additional problem to be addressed:
- The first step must be followed, which is to scrape off the old paint damaged by the action of moisture.
- If there are mold stains then there are two (2) options to take into account to remove them, this is diluted bleach with a brush and rub vigorously with a soft brush or use hydrogen peroxide with a cloth to remove the annoying black fungus. When finished, the wall should be rinsed and wait for it to dry very well.
- To prevent stains from blooming after applying the paint, it is advisable to use anti-mold paint and give the wall one or two coats, always waiting for the recommended drying time.
- Then apply the paint of preference.
It should be remembered that to paint the wall as well as possible, it is best to start painting with a brush the angles, edges and switches, as well as windows and door frames. Then you can proceed to paint the rest of the surface with the medium nap roller to achieve an excellent finish.
By putting these simple recommendations into practice to paint and repair a damp wall, it is possible to put an end to the problem once and for all, achieving a perfect painting and making the interiors of the home look excellent and comfortable.
How to fix humidity problems If the walls are wood?
Moisture problems in wood are a bit more complicated to eliminate because when it gets wet it can expand and become damaged (like plaster) many times having to be replaced. But if the filtration that causes the humidity is treated in time, it is not strictly necessary to make the change in the panels.
- For this it will be necessary to let it dry completely.
- If it has mold stains, it should only be sanded and brushed until the expected result is achieved.
- When it dries well, apply a good sealer and proceed to apply the varnish or paint of your choice.
It should be noted that humidity problems must be solved before treating the walls of whatever material, including new polystyrene-based construction materials.
In very humid or cold climates, it is advisable to apply anti-mold paint, this occurs if the humidity problems occur due to condensation and not due to any filtration that may be affecting the wall.
Preventing the walls from presenting these types of problems is not only an aesthetic and beauty issue but also a health and hygiene issue.
4-Paint the bathtub
To achieve a good finish it is necessary to paint with a two-component polyurethane enamel in the color you want, the most used is white.
Thanks to its characteristics, this product is ideal for painting bathtubs. It is also a product created for that purpose.
We work with Titan’s white ceramic-look glaze . There are other models of various brands, look for the one that suits you best, we recommend this one.
Why do we use this product?
Thanks to the characteristics of this product we will achieve a good finish and we choose it for:
- Maximum hardness
- Does not yellow
- It is two component
- High coverage
- A lot of elasticity
In addition, this product is valid for tiles, sinks, radiators, partitions, cabinets and whiteboards for a blank marker.
If it is not only the bathtub that you need to paint and you also think about painting the walls, do not miss our article where we tell you all about the best interior paintings .
Application method for painting a bathtub
We summarize in 5 simple steps, paint a bathtub:
First, it is important to clean the entire surface to be painted with bleach. Grease or contamination can affect paint coverage and adhesion.
Sand the surface until the surface is smooth. A fine sandpaper will suffice to avoid adhesion problems. A sandpaper of around 280 will be enough.
1st option. You must ensure adherence with an epoxy primer. In this way you will get a good grip even in more adverse difficulties.
This is also a two-component product, it is an epoxy primer that helps adherence to surfaces. In the video, below, the applicator recommends a similar product from the Titan brand.
2nd option. Some professionals choose not to apply the primer, this decision would make the method cheaper but over time, the bathtub may end up flaking.
Stir the container well and mix. Its duration is 4 to 8 hours after the mixing time has elapsed.
The mix is 4: 1. That is, for each part of component A, you must add four of component B.
The yield of a boat is 8-9 square meters.
It can be painted with a brush, roller or spray. Apply between 1 and 2 coats.
Cut out with a brush and paint the rest of the surface with a polishing roller.
Remember that once the mixture is made, the useful life will be 4 hours, then it will petrify and you will not have been able to paint.
Let 18 hours elapse and give a second coat.
You must wait three days to wet the painted surface. According to the technical data sheet, the perfect hardness is generated a week after being painted.
I am attaching a video about the procedure.
5-How to choose the best color for your bathroom?
While replacing tiles may require a professional touch, adding a fresh coat of paint is an easy way to transform your bathroom without the help of a professional. Choosing a paint color for your home can be challenging, and one of the most difficult rooms to design and paint is the bathroom.
Given the size and layout of the bathroom, be careful not to choose a paint color that makes the room appear smaller than it already is. If you are thinking of preparing and painting your bathroom walls on your own, consider the following tips that we have for you.
Our Best Tips for choosing the IDEAL color for your Bathroom
Natural Light vs. Artificial light
One of the things that makes choosing a paint color so difficult is the lack of natural light in most bathrooms. Nothing can alter the color of a painting faster than the artificial light that is so common in bathrooms around the world.
To choose a color that you know will work well in the space, look at the paint cards and color swatches in the bathroom with the lights on and off. This way, you know what color will look like during the day with the lights off, and in the middle of the night with the lights on full blast. If the color works well in both environments, the first test passes.
Choose the right type of paint
Because many bathroom fixtures produce tap water, it is not uncommon for a bathroom to get wet from time to time. Unfortunately, not all types of paint can withstand the level of humidity caused by frequent baths and showers.
When it comes to bathroom paint, it is important to avoid paints that develop mold due to exposure to excessive moisture. Many paint companies offer paints that are designed to inhibit mold growth and softer in the bathroom. For more information, visit your local home improvement store and speak with a paint specialist.
Get a color wheel
Although you probably don’t know it, most bathroom color combinations come straight from the rules of the color wheel. Why do purple and yellow go together? They are facing each other on the color wheel, which makes them complementary. How about green and blue? They are next to each other, which makes them analogous. So for a good background, as well as quick and easy solutions to your color questions, turn to a color wheel.
Learn how to use a color wheel to choose your bathroom colors.
Choose three colors
The rule of three is a great guiding principle for creating a bathroom color scheme. Choose a neutral, rich color, and accent. To do this successfully, think in proportion and rely on a 70/20/10 layout: Use the lightest color for 70 percent of the room decor, the second lightest for 20 percent, and the boldest. for 10 percent.
However, neutrals can be combined in different ways. For example, white plus cocoa brown plus light green equals cool, clean, and classic. But white, cocoa brown, and Kelly green are energizing and uplifting. With this clever rule, your bathroom paint colors will appear to have been chosen by an expert.
Mix Two Neutral Colors
A combination of mostly neutral colors can go a long way in establishing an atmosphere of serenity and calm in the bathroom. Again, the rules of proportion apply: For two bathroom colors, focus on a 70/30 distribution. Two neutrals, like gray and white, make for a really interesting color combination that is understated without being boring. For added visual interest, include a pattern, such as herringbone tiles on the floor, or marbled marble on countertops or siding.
Follow the Second Rule of Three
No matter what colors you’re focusing on, don’t forget the second rule of three: When picking a color, use it at least three times in a room . That can mean on towels, accents in the sink, or a cabinet in the bathroom. This even distribution of bathroom colors makes each shade look intentional and not out of place.
Contrast Two Brightness
If you want your bathroom color scheme to be more energetic than relaxing, consider an updated light collection. For example, orange and blue are complementary and invigorating color ideas for the bathroom. To add a bit of calm to this type of color scheme, use white in the trim, sink, bathtub, or other centerpiece of the room. Plus, fun colored extras in sheets can give your bathroom a new look without breaking the bank or becoming a permanent addition. “A little healthy tension is good.” Inject a bit of surprise into my color schemes. If you don’t have an eye for it, find a fabric or art with an interesting mix of colors and use that as a guide.
Take a look at the floor in your bathroom
If you are not completely sure what color you would like to have in your bathroom, look at your bathroom floor for inspiration. For example, if your bathroom tiles have small patches of color scattered throughout, you may want to consider incorporating one of those colors into your walls.
By choosing a wall color that complements or blends in with your flooring, the room will look more cohesive. If your bathroom floor is carpeted, you may want to consider removing the carpet in the process – future home buyers may find it outdated and unsanitary.
Pay attention to the location
Another way to select your bathroom paint color is to let its location guide your selection. If you live in a typically cloudy area, wearing a bright, uplifting color can boost your mood and give you some sunshine in the morning. Similarly, if your home is located near a beach or lake, using a deep blue can accentuate the natural blue tones in the sky and seas that surround your home.
In addition to the location, think about what the bathroom means to you, if you primarily use your bathroom for a relaxing bath, consider using dark grays or light blues instead of bright, energizing colors.
Don’t be afraid of dark colors
Many people skip warm, rich, and deep tones in favor of lighter, brighter tones in small rooms. That’s a shame, because colors like cocoa can offer a dramatic contrast, especially in a balanced room with white trim and white bathroom fixtures. And, with a dose of another shade, like bright green, the overall effect is lively and contemporary at the same time. “People are nervous about putting dark colors in small rooms. But they don’t make rooms look smaller, they just darken them. Use mercury glass and mirror lamps to make the room seem less cavernous, ”says Kishani Perera, a designer from Los Angeles.
Have ideas in an organic tone
Naturally inspired shades like sea foam green and robin’s egg blue are typically great combos and help bring out an organic vibe in the bathroom. These types of colors are also great for helping to soften otherwise harsh edges and geometric shapes in our bathroom spaces. Incorporate this tip into your bathroom wall colors or sink surface.
Balancing fun selections with a neutral
If your color palette tends toward more lush hues – apple green and hot pink, for example – go for it, but choose a neutral for balance and base. For example, a creamy light brown can be a counterpoint on walls or as a bathroom tile color. “Think of painting as a complementary background rather than what knocks you down when you walk into a room,” says Levin. “I want the fabrics and the furniture to be the stars and for the wall color to tie everything together in silence. Save those bold colors for a little accent like the back of a built-in chair or to revive an old accent chair. “
6-What to do when leaks in the bathroom?
If your roof has a leak that’s never good. And now what should you do? First, the cause of the leak must be identified, including confirmation that it really is a leak . Then, if necessary, call the appropriate professional to help you solve the problem. Now go get a flashlight and let’s get started.
Are you sure it’s a leak?
It’s not to insult your intelligence or suggest alarmist behavior, but sometimes what appears to be a leak in a bathroom ceiling is actually a major condensation problem. If you find water droplets in more than one place and you don’t have a bathroom fan, you may have too much moisture that is simply accumulating on the surface of the ceiling . The water or watermarks may even be somewhat discolored, and that’s due to the fact that no one regularly cleans their ceiling.
Long-term condensation problems can cause paint to peel and / or mold growth, but are less likely to penetrate upward onto the ceiling surface . If the drywall appears solid in the affected area and there are no circular or ring-shaped watermarks on the ceiling around the center of the “leak,” try cleaning the ceiling to remove all traces of water . Then open a window or run the fan during and after showers for several days to see if the water returns . If that doesn’t happen it’s probably just condensation.
Tubes and accessories for inspection
If your roof failed the condensation test, it ‘s time to consider the possible causes of an actual leak. Since you probably don’t live in a grotto, there is no possibility of the roof leaking. What about plumbing pipes above the ceiling surface? These could be supply pipes, which could be leaking or possibly have their own serious condensation problems, or they could be drain pipes, in which case the water is not something you want to leak.
Is there another bathroom on top of this one? If so, you could have a toilet, sink, shower, or some kind of leak . Check the location of each fixture upstairs to see if the leak matches . The water in a bathtub or shower can come from a leaky drain, supply pipe or faucet, or even from a crack in the shower enclosure / tube, such as a cracked grout in the tile of the bathroom. wall or a faulty caulking joint.
You can try this by not using the shower / tub for a few days to see if the leak stops. A leaking toilet will leak water, whether or not the fixture is used. A leak in the sink drain will reveal itself on the floor underneath or inside the sink cabinet. However, keep in mind that dripping water can travel along the top of the ceiling before it actually leaks into the bathroom below, so the source of any leaks might not match the stains on your ceiling.
If your bathroom is under an attic, check for pipes running through the attic . If there is HVAC equipment up there, have a HVAC contractor carefully examine the unit and its service lines. A clogged condensate drain or an overflowing pan could drip water onto the bathroom ceiling from above.
By ruling out those potential causes, we come up with something you’ve probably already thought about: a roof leak . The question is, where exactly is the roof leak? It is not likely to be directly above where it appears on the ceiling. Look for watermarks on the underside of the roof sheathing and / or on the truss beams or joists . Water that passes through the roof can travel down and to the sides for significant distances before falling to the attic floor below. Any penetration into the ceiling, such as a plumbing vent, skylight or chimney, over the site of the bathroom leak is a possible suspect.
Leak in the ventilation duct
So let’s say you have a fan and the duct goes up through a cold space in the attic. Water vapor in vented air can condense as it travels through the ducts, causing water droplets to drip or run back down the duct and ultimately to the ceiling and / or floor of your bathroom . If this is the case, should I continue to use the fan? Absolutely.
In fact, you should use it more often and run it for longer periods to help dry the canal each time. Run the fan for 20 to 30 minutes after each shower. Also, make sure the duct is insulated and the flap on the outer vent cap is working properly . If you have slinky-style flexible plastic ductwork, consider replacing it with smooth, rigid metal, which is better at expelling humid air and will not collect condensate like flexible ductwork does. If you try all of these fixes and the problem persists, you may have to reconfigure the pipeline run so that the option
7-IDEAS FOR PAINTING THE BATHROOM WITH COLOR
Beige and white have had a serious competition: the explosion of color. And in all rooms. Even in the bathroom. There is a whole world of colorful possibilities. For classic, daring, elegant, chic styles … Which one suits you best?
1.GREEN I WANT YOU GREEN
Pantone chose greenery as the star color of 2017 and it is still a 10 pick. It’s vital and fresh. But you can also give it a sophisticated point by combining it with gold. Here, in addition, the “color-block” has been chosen and even the furniture is green. This bathroom is by Miriam Barrio.
2.SERENE AND STATELY GRAY
And that is a rustic bathroom. This is achieved by the color chosen for the walls (and the sinks): anthracite gray, which is one of the most “solemn” colors we can choose from. Bathroom decorated by Lara Vallés, from Space Stage
3.A WHITE AND BLUE BATHROOM
Blue is one of the most popular colors in the bathrooms of the “Mueblers” (the readers of El Mueble, of course). And it is a choice with which you will hardly be wrong. It is fresh and bright, and in a tone as intense as this one, it welcomes
4.WITH FLAMENCO AIR
Don’t think of moles, think of birds. Flamingos, for some time, have become fashionable in prints but they also have a lot to do with our favorite panther. And is that pink is one of the most chosen colors to decorate. It gives a chic and very, very modern touch.
5.A BLACK BATHROOM?
Yes. A very high ceiling helps make an exquisite combination. White tiles to a considerable height and a jet black stripe to the ceiling. The contrast between the two makes the white of the tiles still look much whiter.
If you don’t dare to give your walls a powerful color, stay in the range of grays that tend to brown. They give warmth while decorating with style. Here, the taupe color of the paint also stains the furniture in this bathroom decorated by Iñaki Mújika.
This combination is for daring and free spirits: a piece of furniture with a certain rococo air, a large mirror, a teardrop lamp, mid-height gray tiles, a hydraulic mosaic floor and … fuchsia on the walls! Risky but, really, it is scary.
8.OH! HOW SOFT AND HOW MUCH LIGHT
White suited this classic bathroom, however they opted for a delicate pearl gray and the result was exquisite. Light gray works like white, in terms of clarity, it receives the light and bounces it but is nuanced.
9.A CLASSIC THAT ALWAYS WORKS
Beige tones, more or less intense, and sand , always triumph. In timeless or rustic-style bathrooms, they look great because they add warmth to the environment. In addition, they are long-lasting and last perfect for longer than lighter colors.
10.HOW TO PAINT SMALL BATHROOMS?
The blue light works very well because it produces an effect of “distance” between the walls, which visually wide space. In addition, it transmits serenity, privacy and relaxation, ideal sensations for an intimate space such as the bathroom.
11.ONE OF THE COOLEST COLORS
The mint green. It is a tone that is not lacking in details or trend spaces. It’s cool, smooth, and very happy. Here we have chosen not only to paint the walls but also the carpentry and even the old-style bathtub. Unique.
12.VERY VERY ELEGANT
Petrol gray is perfect for spaces with a classic touch. Antique tiles, lamps and classic furniture, even paintings worthy of a living room … The combination is ideal. Of course, suitable only for very large spaces or those that receive a lot of natural light because it is a tone (and a style) with a lot of presence.
13.CAN THE TILES BE PAINTED?
Of course! The paint is not only suitable for tiled walls up to medium height. It is also suitable for tiled walls up to the ceiling. Choose special tile paint. Not only will it grip perfectly but it will hold up well to moisture. Do you want to know how to paint the tiles ?
14.COLOR-BLOCK IN THE BATHROOM
Not only paint the walls, also choose the tiles of the same color and take the roller to the doors. The effect is 100% enveloping and beautiful. To choose this option, it is best to have a bathroom with a lot of natural light because, depending on the tone you choose, it can make the space somewhat smaller.
Repainting your bathroom is an easy decision to make because it is also easy to correct if you do not get tired of the chosen color soon, but above all, because it is an inexpensive change, quick to carry out and with a brutal effect. But there are other changes that you can also make relatively easily and without overspending. Do you want to see them? Well, keep reading.
It might interest you :